본문 바로가기

IT

vsftpd 로 ftp 서버 운영하기

반응형

 하나더 올립니다. 이번에는 FTP 서버를 운영하기 위한 기본 설치 부분인데요..


 간단히 적어보겠습니다. 별로 할 것도 없고 하니...


 1. FTP 서버 프로그램 설치

 다음 명령어를 입력하여 vsftp 서버 프로그램을 설치합니다. 간단한 사용에 어울리게 용량도 700kb 정도로 경량에다가 설정파일도 한개만 수정하면 되므로 요녀석을 사용하겠습니다.


 2. 환경설정

 


 우분투를 이제 좀 써봤다는 분들은 위의 명령어가 뜻하는 바를 어느정도 감지하시겠지요? GUI 환경의 gedit라는 프로그램을 이용하고 관리자권한(root)으로 해당 프로그램에서 지정한 conf 파일을 수정하겠다는 이야기 입니다.


  열린 환경설정 파일을 간단히 설명합니다.


# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.

# 서버 역할을 하려면 TCP 포트를 열고 클라이언트를 대기 해야 하는데 하겠냐라네요..

# 당연히 합니다.

listen=YES


# 이부분은 제가 직접 입력한 부분입니다. 일반적으로 FTP는 21번 포트를 이용해서 접속하는데

# 저는 예약된 포트는 사용하지 않고 임의의 포트번호를 사용하기로 했습니다.

# 또한 아래 지정된 ftp_data_port 가 기본적으로 20번 포트를 사용합니다.

# 이또한 아래 지정한 번호로 변경합니다.

# 그리고 passive 모드를 사용하여 파일을 전송할 예정이므로 passive 모드에서

# 사용할 포트 대역을 지정하였습니다.

# Chage Listen Port and Data Port
listen_port=10021
ftp_data_port=10020

# Set Pasv Port
pasv_min_port=29000
pasv_max_port=29100

#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)

# anonymouse(익명사용자) 의 접속을 허용할 것이냐라는 것인데 안합니다.
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.

# 로컬유저의 로그인을 허용할 것이냐라는 것인데 YES로 설정시

# 우분투에 접속할 수 있는 유저도 ftp를 사용할 수 있습니다.

local_enable=YES
#
# Uncomment this to enable any form of FTP write command.

# 파일을 올릴 수 있도록 쓰기 권한을 부여합니다.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)

# 파일을 올리면 755 권한으로 올린 파일과 디렉토리의 권한을 설정합니다.

# rw-r--r-- 일겁니다.

local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.

# 아까 anonymouse(익명사용자) 에 대한 접근을 막았긴했는데

# 업로드권한도 주지 않을 겁니다.

anon_upload_enable=NO
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.

# anonymouse(익명사용자) 는 디렉토리도 만들 수 없어야겠죠?
anon_mkdir_write_enable=NO
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:

# FTP 서버에 접속시 보여주는 메시지입니다.
ftpd_banner=Welcome to dante2k_CorpPC FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key



 붉은 부분만 수정한 부분입니다. 좀 더 세세한 부분을 살펴보시려면 다른 분들이 올리신 글을 꼭 읽어보시고 작업을 시작하도록 하세요. 우분투 설정하면서 느끼는 것은 많은 글을 읽고 가장 편리한 방법을 구해서 자신의 PC나 서버에 반영하는 것인 것 같습니다. 검색하는 시간을 좀 들이더라도 확실한 방법을 찾아서 설정하는 것이 삽질(?)을 줄이는 길입니다. 끝.

반응형